उत्पाद विवरण:
भुगतान & नौवहन नियमों:
|
Transmission Speed: | 10G | Fiber Connector: | SFP/LC |
---|---|---|---|
Protocols: | IEEE802.3an, IEEE802.3ae | Transmission distance: | Up to 80Km |
Ethernet Port: | Rj45 | Dimension: | 156 x 128 x 32 mm |
Keywords: | 10G Fiber Ethernet Media Converter | ||
हाई लाइट: | fiber optic ethernet media converter,ethernet fiber media converter |
Overview
The LNK-10G-MC Series is a 10 Gigabit Fiber Ethernet Media Converter. It offers conversion technology by providing one 10GBase-T RJ-45 port and one pluggable 10GBase-X fiber SFP+ port or XFP port. The open SFP+ or XFP port supports a wide variety of E-link 10GE SFP+ or XFP fiber modules, as well as third party MSA compatible SFP+ or XFP modules.
The LNK-10G-MC Series is a copper to fiber 10Gbps Ethernet media converter based on IEEE802.3an and IEEE802.3ae. With SNMP and Web-based management in the LNK600-R16, the Network administrator can monitor, configure and control the activity of each card in the chassis. This converter uses Cat.6a/Cat 7 twisted pair cable as copper transmission media with RJ-45 and 10G optical solution with SFP+ or XFP. The data stream can be converted bi-directionally from 10GBase-T to 10GBase-R and vice versa. With full duplex wire speed forwarding capability between these two media, The LNK-10G-MC brings you the best and simplest solution for the 10G Ethernet conversion between copper wire and fiber.
Technical Indexes
Module Card | SFP+ Module Card | XFP Module Card | |||
Type A | Type B | ||||
Interface | Port A | SFP+ | XFP | ||
Port B | RJ45 | RJ45 | |||
Transmission Speed | 10G | 10G | |||
Data | Technical Indexes | ||||
Protocols | IEEE802.3an(10Gbase-T), IEEE802.3ae(10Gbase-SR/LR/ER/ZR) | Access Type | 10G LAN | ||
Transmission Distance | SFP+ module: Up to 80Km 10Gbase-T: 100meters Cat .6a cable |
||||
Maximum Packet Forwarding Rate | 14,880,950/S | ||||
Network management information |
• Card type information • SFP+ or XFP fiber module detection • SFP+ or XFP fiber module DMI function (Temperature, Voltage, Optical power) • Link status detector • Enable/Disabled Loopback test function • Enable/Disable PRBS Generator and checker function • Rate select (10Gbase-Lan or Wan) • Remote card's status monitor (only in pairs) |
||||
Power requirement | Rack-mountable : AC 85 ~ 220V OR DC -48V Standalone: AC 220V OR DC -48V Power consumption: ≤9W |
||||
Work Environment | Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃ Humidity: 5%~90% (non-condensing) |
||||
Dimension | Card :11.5mm(W)×78mm(D) Standalone :156mm(W)×128mm(D)×32mm(H) |
Features
Application
Connection between fiber to copper 10Gbps Ethernet equipment function as fiber-to-copper media converter for long distance transmission up to 160km
10G SFP+ Fiber Ethernet Media Converter with Build-in Power Supply.
व्यक्ति से संपर्क करें: Mr. Michael Guo
दूरभाष: 19928768315
फैक्स: 86-755-8312-8674
ईथरनेट इंजेक्टर 12 ~ 48VDC पावर इनपुट दीन रेल / वॉल माउंट पर ई-लिंक गीगाबिट पावर
इथरनेट डिवाइसेस पर सिंगल पोर्ट 60W पावर दीन रेल / वॉल माउंट इंस्टालेशन का समर्थन करता है
10/100 / 1000Mbps हाई पावर पीओ इंजेक्टर 95 वाट 802.3bt 100 मीटर ट्रांसमिशन
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
मिनी 4K एचडीएमआई ऑप्टिकल एक्सटेंडर असम्पीडित मल्टीमोड यूएसबी इनपुट 300M
4K SFP LC 80km HDMI फाइबर एक्सटेंडर 10.3Gbps सिंगल मोड फाइबर एक्सटेंडर
SFP 5VDC HDMI ओवर फाइबर ऑप्टिक एक्सटेंडर माइक्रो 4K USB पोर्ट 80Km
4K * 2K HDCP 10.3Gbps HDMI फाइबर एक्सटेंडर SFP LC बाहरी ऑडियो के साथ
टैली फ़ंक्शन या RS485 डेटा के साथ फाइबर कनवर्टर एक्सटेंडर के लिए मिनी 3G/HD-SDIDI
3G-SDI SDI फाइबर ऑप्टिक कनवर्टर वीडियो एक्सटेंडर से अधिक फाइबर 20KM लंबे ट्रांसमिशन के लिए
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M
| साइट मैप