|
उत्पाद विवरण:
भुगतान & नौवहन नियमों:
|
| Data Rate: | 4.25G | Fiber Type: | MM |
|---|---|---|---|
| Wavelength: | 850nm | Distance: | 500 meters |
| Fiber: | Dual Fiber | Connector: | LC |
| हाई लाइट: | sfp bidirectional transceiver,fiber optic transceiver module |
||
4.25G SFP Dual Fiber 500m Multimode SFP Optical Transceiver Module
Features
Applications
Description
The transceiver consists of three sections: a 850nm VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They are compatible with Fiber Channel per FC-PI-2 Rev. 10.0. also simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3.
Absolute Maximum Ratings
Table 1 - Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
| Power Supply Voltage | Vcc-Vee | 0 | 3.6 | V |
| Operating Case Temperature (Commercial) | Tc | 0 | 70 | °C |
| Operating Case Temperature (Industrial) | Tc | -40 | +85 | °C |
| Storage Temperature | Ts | -40 | +85 | °C |
| Operating Humidity | - | 5 | 90 | % |
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | |
| Operating Case Temperature | Standard | Tc | 0 | +70 | °C | |
| Power Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Power Supply Current | Icc | 240 | mA | |||
| Data Rate | 4.25 | Gbps | ||||
Optical and Electrical Characteristics
Table 3 - Optical and Electrical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | ||
| Transmitter | ||||||||
| Date Rate | 4.25 | Gb/S | ||||||
| Centre Wavelength | λc | 830 | 860 | nm | ||||
| Spectral Width (RMS) | ∆λ | 1 | nm | |||||
| Average Output Power (BOL) | Pout | -9 | -2.5 | dBm | 1 | |||
| Extinction Ratio | ER | 5 | dB | |||||
|
Average Launch Power-OFF Transmitter |
Pout | -4.5 | dBm | |||||
| Optical Eye Diagram | Fiber Channel Compliant | |||||||
| Optical Rise/Fall Time(20%~80%) | tr/tf | 120 | ns | |||||
| Data Input Swing Differential | VIN | 300 | 1800 | mV | 2 | |||
| Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |||
| TX Disable | Disable | 2.0 | Vcc | V | ||||
| Enable | 0 | 0.8 | V | |||||
| TX Fault | Fault | 2.0 | Vcc | V | ||||
| Normal | 0 | 0.8 | V | |||||
| Receiver | ||||||||
| Centre Wavelength | λc | 830 | 860 | nm | ||||
| Receiver Sensitivity (BOL) | -15 | dBm | 3 | |||||
| Receiver Overload | 0 | dBm | 3 | |||||
| LOS De-Assert | LOSD | -20 | dBm | |||||
| LOS Assert | LOSA | -25 | dBm | |||||
| LOS Hysteresis | 0.5 | 6 | dB | |||||
| Receiver Reflectance | -20 | dB | ||||||
| Data Output Swing Differential | Vout | 350 | 1800 | mV | 4 | |||
| Loss of Signal (LOS) Assert Time | TAssert | 500 | nS | |||||
| Loss of Signal (LOS) DeassertTime | TDeassert | 500 | nS | |||||
| LOS | High | 2.0 | Vcc | V | ||||
| Low | 0 | 0.8 | V | |||||
Notes:
1. The optical power is launched into MMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 27-1 test pattern @1250Mbps, BER ≤1×10-12
4. Internally AC-coupled.
Timing and Electrical
Table 4 - Timing and Electrical
| Parameter | Symbol | Min | Typical | Max | Unit |
| Tx Disable Negate Time | t_on | 1 | ms | ||
| Tx Disable Assert Time | t_off | 10 | µs | ||
| Time To Initialize, including Reset of Tx Fault | t_init | 300 | ms | ||
| Tx Fault Assert Time | t_fault | 100 | µs | ||
| Tx Disable To Reset | t_reset | 10 | µs | ||
| LOS Assert Time | t_loss_on | 100 | µs | ||
| LOS De-assert Time | t_loss_off | 100 | µs | ||
| Serial ID Clock Rate | f_serial_clock | 400 | KHz | ||
| MOD_DEF (0:2)-High | VH | 2 | Vcc | V | |
| MOD_DEF (0:2)-Low | VL | 0.8 | V |
Diagnostics
Table 5 – Diagnostics Specification
| Parameter | Range | Unit | Accuracy | Calibration |
| Temperature | 0 to +70 | °C | ±3°C | Internal / External |
| -40 to +85 | ||||
| Voltage | 3.0 to 3.6 | V | ±3% | Internal / External |
| Bias Current | 0 to 100 | mA | ±10% | Internal / External |
| TX Power | -9 to -3 | dBm | ±3dB | Internal / External |
| RX Power | -23 to -3 | dBm | ±3dB | Internal / External |
व्यक्ति से संपर्क करें: Mr. Michael Guo
दूरभाष: 19928768315
फैक्स: 86-755-8312-8674
ईथरनेट इंजेक्टर 12 ~ 48VDC पावर इनपुट दीन रेल / वॉल माउंट पर ई-लिंक गीगाबिट पावर
इथरनेट डिवाइसेस पर सिंगल पोर्ट 60W पावर दीन रेल / वॉल माउंट इंस्टालेशन का समर्थन करता है
10/100 / 1000Mbps हाई पावर पीओ इंजेक्टर 95 वाट 802.3bt 100 मीटर ट्रांसमिशन
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
मिनी 4K एचडीएमआई ऑप्टिकल एक्सटेंडर असम्पीडित मल्टीमोड यूएसबी इनपुट 300M
4K SFP LC 80km HDMI फाइबर एक्सटेंडर 10.3Gbps सिंगल मोड फाइबर एक्सटेंडर
SFP 5VDC HDMI ओवर फाइबर ऑप्टिक एक्सटेंडर माइक्रो 4K USB पोर्ट 80Km
4K * 2K HDCP 10.3Gbps HDMI फाइबर एक्सटेंडर SFP LC बाहरी ऑडियो के साथ
टैली फ़ंक्शन या RS485 डेटा के साथ फाइबर कनवर्टर एक्सटेंडर के लिए मिनी 3G/HD-SDIDI
3G-SDI SDI फाइबर ऑप्टिक कनवर्टर वीडियो एक्सटेंडर से अधिक फाइबर 20KM लंबे ट्रांसमिशन के लिए
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M
| साइट मैप
